BS EN166 PRESCRIPTION SAFETY GLASSES

Helpline : 01925 357003 
OK

GLAZE MY OWN INSERT - Order Page

From £55.00 (+VAT) including single focus lenses
  • You supply your insert and we will glaze it for you for you to clip back into your spectacles, goggles or mask.
  • We just need an image of your wearing the appliance to calculate lens centration with a ruler in shot
  • The lab order will be emailed after payment. You then send the insert and order direct to the lab.
  • NOTE: this is undertaken at your own risk. Insert breakage is not covered.

 

Specify your glasses from the options below...

  • Select Vision Type

    Single Focus

    A lens with a single strength.

    I want my safety spectacles for viewing...

    Distance (£0)

    Intermediate (£0)

    Near (£0)

    Everything (£0)

    Bifocal

    Saves having separate pairs of spectacles for distance and near. Useful for ‘reading specs only’ wearers who need to be protected all of the time.

    (over 45-48yr olds)

    Select (Upgrade £40) - Distance top / Near bottom

    ERROR:Please select a vision type
    Next
  • Select Prescription Lens Material

    Note that lens material has no affect on the impact rating of the frame - only the thickness of the prescription lens. The outer polycarbonate visor is the protective component

    Standard plastic (CR39)

    Select (£0)

    1.60 thin lenses

    • Approx 18% Thinner and Lighter than standard plastic
    • Recommended when SPH or (SPH + CYL) power exceeds +/-3.50

    Select (Upgrade £35)

    1.67 ultrathin lenses

    • Approx 27% Thinner and Lighter than standard plastic
    • Recommended when SPH or (SPH + CYL) power exceeds +/-5.00

    Select (Upgrade £65)

  • Select Coatings for Prescription Lenses

    SCRATCH RESISTANT COAT (HARDCOAT)

    Adds a tougher surface just to the prescription lenses to help prevent them from scratching.

    Add (£10)

    Multi anti-reflection coating

    Reduces glare and distracting reflections from the front and rear surface of the lens.
    The coating improves vision, allows more light to pass through the lens and makes the lens almost invisible in the frame

    Add (£28)

  • Select Extras

    Anti fog lens treatment

    DEFOGit™ is a 5ml new concentrated formula using nanotechnology to create a moisture absorbing layer on the lens eliminating misting. It is simply applied by wiping one or two drops across each lens surface and then buff dry using the cloth supplied to give fog free wear.

    Play videoSee video of Clarity DEFOGit

    Add (£9.95)

    Ultra-Clarity lens cleaner

    30ml Polycarbonate safe lens cleaner & cloth. Specifically selected for cleaning our safety glasses of any lens/frame material.

    Add (£5.95)

    Freehand engraving

    Personalise your safety frame with your initials (max 3) and we will add the date of manufacture.

    (Note: Engraving is done using a freehand engraving pen in a suitable location on the frame which may include a place where the markings are visible whilst being worn)

    Add (£3)

  • Enter Prescription Details

    PRESCRIPTION RANGE AVAILABLE
    SPH or (SPH + CYL) not exceeding +/- 6.00
    and/or CYL not exceeding +/- 4.00

    RIGHT EYE

    SPH

    CYL

    AXIS

    PRISM X

    Show

    BASE X

    Show

    LEFT EYE

    SPH

    CYL

    AXIS

    PRISM X

    Show

    BASE X

    Show

     

    NEAR or READING ADD

    INTERMEDIATE or INTER ADD

     
    My prescription doesn't look like this...
    Prescription Help  Help

    BEFORE YOU PROCEED
    Check the prescription details you have entered and ensure they are correct 

    PAY PARTICULAR ATTENTION TO THE SPH AND CYL SIGNS (PLUS or MINUS) AS THIS IS A SIMPLE ERROR TO MAKE.

    (Note: a small line above a hand written value (rather than in front of it) denotes that it's negative)


    YOU CAN UPLOAD THE PRESCRIPTION HERE IF YOU ARE UNSURE OR YOU NEED US TO CHECK THE VALUES BEFORE MANUFACTURE.

    HOWEVER, IF YOU ARE HAPPY WITH YOUR PRESCRIPTION ENTRY ABOVE, YOU CAN SKIP THIS UPLOAD AND MOVE TO THE NEXT SECTION

    Alternatively, if you want to send us a copy of your prescription straight after you have placed your order, email it to email@safetyspecs.co.uk

  • Pupiliary Distance Options

    I know my PD

    Enter your value below if you know it already.
    Don't guess it or try to measure it your own way, its important it's accurate.

    Note: If you have been given right and left values from your Optician please add them together & round up if not a whole number.

    Select


    IF YOU DON'T KNOW YOUR PD...

    ASK YOUR OPTICIAN

    If you ask nicely and explain its for safety glasses for work, your Optician will often tell you. (but note they are not obliged to)

    If you manage to get the value enter it in 'I KNOW MY PD' above.


    OR

    LEARN HOW TO ACCURATELY MEASURE IT YOURSELF

    CLICK HERE FOR INSTRUCTIONS

    Once you are happy with your measurement enter it in 'I KNOW MY PD' above.


    OR

    WE CAN MEASURE IT FOR YOU

    Provide us with an image of yourself taken with a cm scale ruler in the photo.

    • Simply hold a standard ruler or one of our e-dispensing rulers against the forehead.

    • Clean the lens and hold the camera at eye level, 40cm from the face

    • Look into the lens and take the shot.

    Select

    ERROR:Please select a pupiliary distance option
    Next
  • Select Manufacturing Time

    Delivery (2-3 Weeks)

Glaze my own insert £ 55.00
  • You supply your insert and we will glaze it for you for you to clip back into your spectacles, goggles or mask.
  • We just need an image of your wearing the appliance to calculate lens centration with a ruler in shot
  • The lab order will be emailed after payment. You then send the insert and order direct to the lab.
  • NOTE: this is undertaken at your own risk. Insert breakage is not covered.

 

In stock
Online - Start Chat?

Your name *

 

Cancel